Husky 418

Preventative Treatment:

To prevent mold and mildew growth on surfaces:

1. Apply this product on area until evenly wet.
2. To promote drying, wipe off excess wetness.
3. Allow treated surfaces to dry completely.

Remedial Treatment to Eliminate Mold:

This product must be used as part of a comprehensive mold remediation or water damage restoration program, including:

1. Monitoring for conditions favorable to mold growth such as moisture ingress and high relative humidity.
2. Eliminating conditions favorable to mold growth.
3. Drying affected areas to below 20% moisture content.

Small Areas: Total Surface Area Affected Less than 30 Square Feet. Areas of growth less than 30 sq. ft. (area of a single wall panel) can normally be remediated easily. If ceiling tiles or other easily removable items are moldy, remove them, seal in a plastic bag and dispose with normal trash. If the surface is not easily replaceable: 1. Remove heavy soil. 2. Apply this product on area until evenly wet. 3. If desired, wipe off excess wetness. 4. Allow treated surfaces to dry completely. This product will not whiten stains on contact. In some cases, staining may be irreversible. If additional steps are taken to remove or cover the stain, reapply this product as a final step to protect area from regrowth.

Large Areas: Total Surface Area Affected Greater than 30 Square Feet. Areas larger than 30 sq. ft. require special procedures and individuals trained in remediation. Refer to the recommended websites for guidelines on remediation. Before using this product to mitigate large areas, you should understand one or more of these guidelines. Follow these guidelines to apply this product. When water damage is suspected, first eliminate the water source. Next, remove excess water and dry surfaces thoroughly. This product can be used on materials removed for disposal. If excess water is removed within 24 hours, spraying affected surfaces with this product will prevent growth. Building materials exposed to water in excess of 24 hours may have extensive microbial growth that is not visible. Prepare a complete assessment and remediation plan to incorporate product use. Consult the following websites for remediation guidance.

Reapplication: Reapply weekly or when growth or odor reappears. Determine and correct the cause of re-growth and ensure surface is thoroughly dried before reapplication. Reapply this product if surfaces are washed or painted.