Husky 1240

Staphylococcus aureus – Methicillin Resistant (MRSA), Enterococcus faecalis – Vancomycin Resistant (VRE), Influenza A2, HIV-1 (AIDS Virus); Escherichia coli (E. Coli), Salmonella choleraesuis, Staphylococcus aureus, Pseudomonas aeruginosa

To Clean and Deodorize:

1. Remove all gross filth or heavy soil from surfaces to be treated prior to using this product.
2. Shake well before each use.
3. Point valve opening toward area to be cleaned, press down firmly and spray evenly.
4. Wipe clean with dry cloth, turning frequently.

For Control of Mold and Mildew:

1. Apply by holding can upright 6” to 8” from surface to be treated.
2. Spray until surface completely wet. Let air dry.
3. Repeat application at weekly intervals or when mildew growth appears.

To Disinfect:

1. After surface is cleaned, hold can upright 6” to 8” from surface to be treated.
2. Spray until surface is thoroughly wet.
3. Allow to dry without wiping or allow spray to contact treated surface for a minimum of ten minutes prior to wiping.
4. When used as a disinfectant on food contact surfaces such as counter tops, tables, and appliances, thoroughly rinse surfaces with potable water. Do not use on utensils, dishes, or glasses.

SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV ON SURFACES OBJECTS SOILED WITH BLOOD/BODY FLUIDS

Personal Protection:

1. When handling items soiled with blood or body fluids, use barrier protection: disposable latex gloves, gowns, masks and eye coverings.

Cleaning Procedure:

1. Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of this disinfectant.

Contact Time:

1. Spray surface to be treated 3-4 seconds, from a distance of 6-8 inches, until surface is wet.
2. Allow spray to dry without wiping or allow spray to contact treated surface for a minimum of ten minutes prior to wiping.

Disposal of Infectious Materials:

1. Autoclave blood and other body fluids and dispose of according to federal, state and local regulations for infectious waste disposal.

Note: this product is not for use on medical devices or medical equipment surfaces.